In the use of pressure equipment, in order to prevent personal injury and equipment accidents must take security measures. The basic requirements are as follows:
1. Maintenance personnel, should be required to wear good labor protection supplies.
2. Without safe study, not on the job, the need for a safety certificate of work, prohibit undocumented induction operation.
3. Overhaul, such as multi-person operation, there must be someone command, command signal should be unified, clear, other personnel are not free to command.
4. Equipment maintenance, should be cut off the power, remove the fuse, and hang up for the billboard.
5. Before servicing the pressurized equipment or piping, the pressure should be reduced to atmospheric pressure.
6. Used to replace or remove the zero, accessories, should be placed neatly, smooth, so that safe and rapid work.
7. During the repair process, pay attention to protect the cable, wire, to prevent damage and not arbitrarily cut off.
8. Work around the ground and above, should pay attention to check whether the improper placement, adhesion and corrosion damage to the items, so as not to fall or fall off to hurt.
9. In the course of work, should always clean up the oil on the ground, so as not to slip down.
Above is today introduced to you for the use of pressure equipment, when the security measures must be concerned about the official website of Yu-fat can understand more pressure machine knowledge
Post time: 02-25-2017